Maintenance – Zenoah G5000AVS User Manual
Page 46
46
10. Maintenance
English
F30
4. Spark plug
Clean the electrodes with a wire brush and reset the
gap to .025 in. as necessary.
Replacement plug:
Champion RCJ-6Y or NGK BPMR8Y
5. Sprocket
Check for cracks and for excessive wear interfering
with the chain drive. If the wearing is found obviously,
replace it with a new one. Never fit a new chain on a
worn sprocket, or a worn chain on a new sprocket.
6. Front and Rear dampers
Replace if adhered part is peeled or crack is observed
on the rubber part.
See also other documents in the category Zenoah Petrol tool:
- G3400 (8 pages)
- 3300E (11 pages)
- G3200 (5 pages)
- G3300E (16 pages)
- G621AVS (7 pages)
- G3700 (9 pages)
- G2500 (6 pages)
- G3000 (20 pages)
- G6200 (7 pages)
- G6200 (16 pages)
- G3801 (15 pages)
- G2000 (17 pages)
- G5200 (17 pages)
- G5200 (18 pages)
- G4100 (4 pages)
- G4200/G4200EZ (9 pages)
- G3800 (4 pages)
- CHAIN SAWS G2500 (18 pages)
- GZ4000 (15 pages)
- G5000 (19 pages)
- G500AVS (16 pages)
- G2500 OPS (19 pages)
- EB4401 (28 pages)
- G4500 (15 pages)
- G2000T (16 pages)
- G2000T (17 pages)
- GZ3500T (18 pages)
- GZ400 (15 pages)
- GZ4500 (15 pages)
- G415AVS (15 pages)
- G3300 (16 pages)
- KOMATSU G3800 (8 pages)
- G3100T (28 pages)
- KOMATSU G5000AVS (72 pages)
- G3300EZ (16 pages)
- G3200EZ (64 pages)
- G3800AVS (36 pages)