Yamaha DSP-A595 - Manual (Page 45)

45
English
SYMPTOM
The remote control transmitter does
not work.
The sound is degraded when
listening with headphones to a
CD player or tape deck that is
connected to this unit.
CAUSE
Direct sunlight or lighting (of an inverter
type of fluorescent lamp etc.) is striking
the remote control sensor of the main
unit.
The manufacturer’s code is not set
properly.
The proper manufacturer’s code for the
component to be controlled is not set.
The component to be controlled is not
selected.
This unit is in the standby mode.
REMEDY
Change the position of the main unit.
Set the code again.
Try entering another code for the same
manufacturer.
Set the SELECTOR DIAL to the proper
position.
Turn the power of the unit on.
Remote contr
ol transmitter
Other
s
DSP-A595-7 3/25/99, 3:55 PM 45