Yamaha DSP-A595 - Manual (Page 20)

20
ADJUSTING METHOD
Operations should be made while watching the information on this unit’s display.
If you are using the remote control transmitter, set the
SELECTOR DIAL to the AMP/TUN or DSP position on the
remote control transmitter.
or
1
Turn the power on.
Front panel Remote control
or
2
Press SET MENU once or more to select the title
“1. CNTR” (so that “CNTR” appears on the display).
Front panel Remote control
or
* After pressing SET MENU once on the remote control
transmitter, you can also select the title by pressing .
(Pressing goes back one selection.)
Appears.
3
Press + or – once or more to select the position you
want.
Front panel Remote control
or
Changes.
4
Repeat steps 2 and 3 to change selections on
“2. REAR”, “3. MAIN”, “4. BASS” and/or “5. M.LVL” in
the same way.
1 2 3
1
2
3
DSP-A595-2 3/25/99, 3:53 PM 20