Yamaha HTR-5230RDS User Manual

Page 13

English

ASIC OPERA

TION

AD
V

ANCED OPERA

TION

APPENDIX

INTR

ODUCTION

PREP

ARA

TION

■

AM loop antenna (included)

The AM loop antenna can be removed from the stand and
attached to a wall, etc. However, note that the reception
sensitivity may deteriorate if the antenna is attached to a
metal or steel reinforced wall.

Notes

• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

■

Connecting the AM loop antenna

Press the tab and unlock the terminal hole.

Insert the AM loop antenna lead wires into the
AM ANT and GND terminals.

Return the tab to its original position to lock
the lead wires. Lightly pull the lead wires to
confirm a good connection.

Attach the loop antenna to the antenna stand.

Orient the AM loop antenna so that the best
reception is obtained.

■

Outdoor AM antenna

If you cannot obtain good reception with the AM loop
antenna, connect 5 m to 10 m of vinyl covered wire to the
AM ANT terminal and extend it outdoors from a window.

■

Ground (GND terminal)

For maximum safety and minimum interference, connect
the antenna GND terminal to a good earth ground. A good
earth ground is a metal stake driven into moist earth.

CONNECTIONS

Antenna stand

AM loop antenna

Vinyl covered wire (5 m to 10 m)

0103V396RDS08-18_EN

1/6/0, 7:33 PM