Zanussi ZWF1000M - Manual (Page 17)

If the washing machine cannot work normally, a alarm code will appear on the display. Please carry
out the following checks.
Alarm codes
ZANUSSI
Alarm
Code
Status of
Corresponding
Indicators
W
ash
Rinse Spin
Of
f Of
f
Flash
Door lock
problem Door is not closed properly. Restart after the door is closed
Reason Solution Description
Please call the service number if you experience any
problems.
Of
f
Flash
Of
f
Of
f
Flash Flash
Of
f
Flash
On Excessive
Foam
Drain problem
while washing
(drain time
exceeds 7 minutes)
Water fill problem
when washing
(water fill time
exceeds 5
minutes)
Tap is not opened or water
flows too slowly.
Inlet valve filter is blocked.
Inlet pipe is twisted.
If water is not supplied
Open the tap or wait till
the water supply
becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in
the room.
Outlet hose is blocked or
twisted
Drain pump is blocked
Wash and straighten outlet
hose.
Wash drain pump filter
Please call up the service line if there is any other problem.
Excessive detergent has
been used. Wrong detergent
used.
Detergent used improperly.
Reduce detergent quantity
Use the detergents suitable
for washing machine
Please call the service number if you experience any
problems.
Please call the service number if you experience any
problems.
Please call the service number if you experience any
problems.
17