Zebra Technologies P420 User Manual

Page 15

3. Load ribbon onto the supply spindle

(under print head carriage) and empty

core (with tape attached) onto the take-

up spindle. Make sure the ribbon comes

off the top of the supply spindle and feeds

to the top of the take-up spindle.

4. Push down on the Print Head Lock Le-

ver until an audible 'click' signals the

locked-down position.

Please note that the ribbon automatically synchro-

nises whenever the print head lock down occurs.

5. Close Cover.

SUPPLY SPINDLE

TAKE UP SPINDLE

`CLICK'

OPERATION

The card flipper will not operate and an error will

be indicated if you try to flip a card when the cover

is open.