ZyXEL Communications P-660H Series - Manual (Page 3)

P-660H Series Quick Start Guide
3
1 DSL: Connect the Prestige to a telephone jack using a telephone wire.
2 LAN: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or
Internet access.
3 POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source
(see the User’s Guide for power adaptors specifications by region).
After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel
LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS then turn steady on if the
testing is successful. The LAN LED turns on if the LAN port is properly connected.
2 Configuration for Internet Access
You may configure the Prestige for Internet access in any one of these ways:
• Zero Configuration
• Web Configurator Internet Access Wizard