Zanussi ZCG560G - Manual (Page 14)

Problem Possible cause Remedy
The gas ring burns un-
evenly. The burner crown is blocked with food
residue. Make sure that the injector is not
blocked and the burner crown is clear of
food particles.
The oven does not heat
up. The oven is not activated. Activate the appliance.
The oven does not heat
up. The necessary settings are not set. Control the settings.
Steam and condensa-
tion collect on the food
and in the oven. You left the dish in the oven for too
long. Do not keep the dishes in the oven for
longer than 15 - 20 minutes after the
cooking ends.
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre. The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to the Safety chapters.
Location of the appliance
B
C C
A
Minimal distances
Dimension mm
A 690
B 150
C 20
Technical Data
Dimensions
Height 855 mm
Width 500 mm
Depth 600 mm
Gas Category II2H3B/P
Gas Supply G20 (2H) 20 mbar
G30/G31 (3B/P) 50/50
mbar
By-pass diameters
14
www.zanussi.com