Yamaha CDX-393 - Manual (Page 9)

9
English
To stop play temporarily To stop play completely
PAUSE STOP
To resume play, press the PAUSE button again (or press the
PLAY button).
*
button on the front panel can also be used to stop
play temporarily or to resume play.
To play a desired track on the disc
DIRECT PLAY
Select a desired track using the number buttons.
5
1 2 3 4 5 6 7 8 9
The selected track
number is displayed.
Example: To select track 25,
Press the number 10 button twice, then press the number 5
button once.
+ I0 5
(twice)
* If you enter a number that is higher than the last track
number on the disc, the final track is played.
Caution
When the disc tray is open, do not touch the inside gear
wheel. If you touch the gear wheel, your finger may be
caught in the closing tray and injured.
Gear wheel
SKIP PLAY
To skip to a succeeding track, press the SKIP button once
or repeatedly until the desired track number appears.
SKIP
To skip to the beginning of the current track, press the
SKIP
button once.
SKIP
To skip to a preceding track, press the SKIP button
repeatedly until the desired track number appears.
SKIP
• These operations can also be performed when the unit is in
the pause or stop mode.
• When using the SKIP button on the remote control
transmitter:
If the button is pressed and held, the track number
continuously changes to higher numbers (or lower
numbers).
• When using the SKIP/SEARCH button on the front panel:
Be careful not to press and hold the button, otherwise the
selected track is played forward (or backward) rapidly.