Zanussi ZNB 344 S - Manual (Page 20)

20
20. Put the appliance into its location, set it level, and
apply to voltage it.
In case you do not want to perform the procedures
above, please contact your local Service Force
centre. The engineer will carry out the door reversal
at your cost
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket or accelerate
this process by heating the part involved with a normal
hairdryer on a low setting.