Zanussi ZNB 344 S - Manual (Page 18)

18
In the bag of the accessories there are two spacers
which must be fitted in the two top corners.
Slacken the screws and insert the spacer under the
screw head, then re-tighten the screws.
Levelling the Appliance
When positioning the appliance ensure that it stands
level. This can be achieved by two adjustable feet at
the bottom in front.
Do not stand the appliance next to a source of heat
such as a radiator or cooker.
Ventilation Requirements
The appliance must have adequate ventilation to
ensure correct operation.
Diagram shows the ventilation requirements when
installed:
A Under a cupboard.
B When freestanding
Removal of glass shelf blockers
from the product
The glass shelf blockers are used to fix the shelves
into position during product transport. These blockers
will not be necessary for the further operation of the
product.
Open the refrigerator door as wide as possible.
1 Slide the blocker tabs to the front of the shelf.
2 Lift the back of the shelf from its nest and then pull
it towards yourself by tilting its front
upwards/downwards.
3 Remove the blocker tabs.