Yamaha CD Recordable/Rewritable Drive CRW3200 - Manual (Page 11)

Names and Functions of Parts
3
➀ DIGITAL AUDIO OUT
Connects to the sound card in the
computer if the sound card has an SPDIF
(digital audio) input jack using an
optional digital audio cable. (P. 20)
➁ ANALOG AUDIO OUT
Connects to the sound card in the
computer using the included audio cable.
(P. 19)
➂ Jumper switch
Insert a plastic shunt into the switch to
set the connection of the IDE to master or
slave. The switch is set at slave by
default. (P. 14)
➃ IDE INTERFACE CONNECTOR
Connects the included 40-pin IDE cable.
(P. 17)
➄ DC INPUT
Connects the 4-pin internal power cable
of the computer. (P. 21)
Rear Panel
➁ ➀ ➂ ➃ ➄