Yamaha KX-10 - Manual (Page 13)

13
ENGLISH
MAINTENANCE
CLEANING OF THE TAPE PATH
Continued high quality performance of your deck is
dependent upon periodic cleaning of the heads, capstan,
pinch roller, and all surfaces over which the tape travels.
Normal use will cause an accumulation of dirt and dust on
the heads, capstans, and pinch rollers. This can lead to
poor sound quality, drop outs (intervals with no sound),
unsteady tape speed, loss of high frequency response, etc.
Thus, clean the heads and all surfaces over which the tape
travels with a commercially available cleaning cassette. DEMAGNETIZATION
After 20-30 hours of use, enough residual magnetism will
build up on the heads to cause poor high frequency
reproduction. At this time you should use a commercially
available head demagnetizer.
¶ When demagnetizing the heads, be sure to follow the
instructions of the head demagnetizer carefully.
30° 30°
OPTIONAL REMOTE CONTROL TRANSMITTER
Remote sensor
6 m (20 feet)
These shaded
buttons control
this deck.
With the optional remote control transmitter RS-KX1, you
can operate this unit at your listening position. For details,
refer to the instruction manual supplied with the remote
control transmitter. REMOTE CONTROL OPERATION RANGE
RESET MEMORY
REMAIN TAPE COUNTER
DUBBING
INTRO SCAN
SEARCH
DECK A/B
DIR A DIR B MONITOR
PLAY
REC/PAUSE STOP REC MUTE
!
!
s
REMOTE
CONTROL
TRANSMITTER