Yamaha RX-N600 - Manual (Page 69)

SOUND FIELD PROGRAMS
65
En
SOUND
FIELD
PR
OGRAMS
What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In
addition to making the sound live, these reflections enable us to tell where the player is situated as well as the size and
shape of the room in which we are sitting.
■ Elements of a sound field
There are two distinct types of sound reflections that combine to make up the sound field in addition to the direct sound
coming straight to our ears from the player’s instrument.
Early reflections
Reflected sounds reach our ears extremely rapidly (50 ms to 100 ms after the direct sound), after reflecting from one
surface only (for example, from a wall or the ceiling). Early reflections actually add clarity to the direct sound.
Reverberations
These are caused by reflections from more than one surface (for example, from the walls, and the ceiling) so numerous
that they merge together to form a continuous sonic afterglow. They are non-directional and lessen the clarity of the direct
sound.
Direct sound, early reflections and subsequent reverberations taken together help us to determine the subjective size and
shape of the room, and it is this information that the digital sound field processor reproduces in order to create sound
fields.
If you could create the appropriate early reflections and subsequent reverberations in your listening room, you would be
able to create your own listening environment. The acoustics in your room could be changed to those of a concert hall, a
dance floor, or a room with virtually any size at all. This ability to create sound fields at will is exactly what YAMAHA
has done with the digital sound field processor.
• Choose a sound field program based on your listening preference, not merely on the name of the program.
• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input
source (see page 38).
• Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs
are applied.
■ Front panel operations
Rotate the PROGRAM selector on the front panel.
The name of the selected sound field program appears in
the front panel display and in the OSD.
■ Remote control operations
Set the component selector switch to AMP and
then press one of the sound field program
selector buttons on the remote control
repeatedly.
The name of the selected sound field program appears in
the front panel display and in the OSD.
SOUND FIELD PROGRAMS
Selecting sound field programs
Notes
ZONE 2
ON/OFF ZONE CONTROL
DISPLAY CATEGORY
NEXT
SEARCH MODE
EFFECT
MEMORY MAN'L/AUTO FM FM/AM PRESET/TUNING EDIT A/B/C/D/E
PROGRAM
l PRESET/TUNING/CH h TUNING MODE AUTO/MAN'L
INPUT MODE TONE CONTROL STRAIGHT SPEAKERS PHONES
ON/OFF
MAIN ZONE
MASTER
SILENT CINEMA
B A MULTI CH INPUT
VOLUME
INPUT
ON OFF
LEVEL
VIDEO L AUDIO R USB VIDEO AUX
(U.S.A. model)
PROGRAM selector
TV MUTE TV INPUT MUTE
AMP
SOURCE
TV
PRESET/CH
STEREO
1
EFFECT
VOLUME TV VOL TV CH
STANDARD
5
SPEAKERS
9
MUSIC
2
SELECT
6
ENHANCER
0
ENTERTAIN
3
EXTD SUR.
7
NIGHT
10
MOVIE
4
DIRECT ST.
8
STRAIGHT
ENT.
(U.S.A. model)
AMP
Sound field program
selector buttons