Yamaha M170 - Manual (Page 9)

RUNNING H/F 1
7
PRE
P
ARA
T
ION
If you connect other components such as a VCR, DVD or MD to the following jacks on this unit, you can enjoy those
sources with this unit. This section provides some examples of other AV component connections. For information about
connecting to your AV components, refer to the owner’s manual for it.
• Do not connect the power cable of this unit until all cable connections are completed.
• Turn off the audio component before connecting it to this unit.
■ TAPE/AUX jacks
Connect the AUX IN jacks on this unit to the
output jacks of the each component. Then,
connect the AUX OUT jacks on this unit to the
each input jack of the component.
Be sure to insert each plug securely. To prevent humming and
noise, do not bundle the connection cords with the power cord or
speaker cord.
■ DIGITAL OUT terminal
Connect the DIGITAL OPTICAL OUT jack on this
unit to the digital input jack on the MD or CD-R
etc.
When inserting the optical cable plug, open the protective shutter
of the terminal and insert the cable plug until it makes a click
sound. Do not force the plug, because this could result in damage
to the protective shutter, the cable or the unit itself.
CONNECTING OTHER COMPONENTS
Notes
MAINS
+ +
OUT IN OUT IN
AM ANT GND
DAB ANT
OPTICAL
SPEAKERS
OUT
SUBWOOFER
_ _
TAPE AUX 1
TUNER
DIGITAL
OUT
IN
AUX 2
Cassette deck MD, CD-R, etc.
L R
VCR, DVD, etc.
OUT PUT
L R
OUT PUT
L R
IN PUT
L R
OUT PUT
L R
IN PUT
OPTICAL IN
00EN_00_CRX-M170_G.book Page 7 Wednesday, July 27, 2005 6:11 PM