Before the first use, Using the oven, Telescopic shelf supports – Zanussi ZBM 879 User Manual
Page 8

8
F
Before the First Use
Remove all packaging, both inside and
outside the oven, before using the oven.
Before first use, the oven should be heated without food.
During this time, an unpleasant odour may be emitted.
This is quite normal.
1.
Switch on the oven by pressing the "ON"
push button.
2.
Press button
twice. The pilot light to
the left of symbol
will come on.
3.
Set the temperature to 250°C using the
"Increase" button (push button ).
4.
Open a window for ventilation.
5.
Allow the oven to run empty for
approximately 45 minutes.
This procedure should be repeated with the full grill
function
and the fan oven function
for
approximately 5-10 minutes.
Using the Oven
Always cook with the oven door closed.
Stand clear when opening the oven door.
The oven has four shelf levels, counted from the
bottom, as shown in the diagram. Your oven is
supplied with two shelves, one normal and one
anti-tip.
The normal shelf is intended for use on the
telescopic shelf supports.
It is important that these shelves are correctly
positioned as shown in the diagram. Shelf level 2
is fitted with telescopic shelf supports .
Do not place cookware directly on the oven base.
Telescopic shelf supports
Shelf level 2 is fitted with telescopic shelf supports.
1. Pull the right and left hand telescopic shelf supports
completely out, as shown in the diagram.
2. Place the shelf or the grill pan on the telescopic shelf
supports, as shown in the diagram, then gently push
them all inside the oven.
Do not attempt to close the oven door if the
telescopic shelf supports are not completely inside
the oven. This could damage the door enamel and
glass.
The anti-tip shelf is not designed for use on the
telescopic shelf supports.
Please, do not use the anti-tip shelf on the
telescopic shelf supports, as it will be unstable
and may fall.
4
3
2
1
F