beautypg.com

Yamaha RX-V463 User Manual

Page 30

background image

26

En

Optimizing the speaker setting for your listening room

The display changes as follows.

The results displayed under “RESULT” are as follows.

Number of speakers

SP

Displays the number of speakers connected to this unit in
the following order:
Front/Back/Subwoofer

Speaker distance

DIST

Displays the speaker distance from the listening position
in the following order:
Closest speaker distance/Farthest speaker distance

Speaker level

LVL

Displays the speaker output level in the following order:
Lowest speaker output level/Highest speaker output level

• If “E-9:INTERNAL ERROR” appears during the testing

procedure, restart from step 4.

• If you selected “RELOAD” in step 4, no test tones are output.
• If an error occurs during the “AUTO SETUP” procedure, the

setup procedure is canceled and an error screen appears. For
details, see “If an error screen appears” on page 27.

• When this unit detects potential problems during the “AUTO

SETUP” procedure, “WARNING” and the number of warning
messages appears (see page 27).

7

Press 8k

and 8ENTER to display the

setup results in detail.

8

Press 8l / h repeatedly to toggle between
the setup result displays.

y

If you are not satisfied with the results or want to manually
adjust each parameter, run “MANUAL SETUP” (see
page 61).

The distances displayed in the “DISTANCE” results may be
longer than the actual distance depending on the
characteristics of your speakers.

9

Press 8

ENTER to return to the result

display.

Notes

AUTO SETUP

SETUP

;;;;;;;AUTO

. START

Automatic
Processing
of all item
[ ]/[ ]:Up/Down
[ENTER]:Start

p

p

AUTO SETUP

RESULT

SP

:

3/2/0.1

DIST:

3.2/3.5m

LVL :

-2/+2dB

. SET

CANCEL

[ ]/[ ]:Up/Down
[ENTER]:Enter

>

INITIALIZING

. WIRING/LEVEL

DISTANCE
SIZE

WAITING

;;;

;;;;;;;;;;

[ ]:Exit

[

AUTO SETUP

Note

Results of the speaker
connection and wiring

Results of the speaker
distance from the
listening position

Results of the speaker
size

Results of the speaker
output level

AUTO:RESULT

. RESULT

SP

:

3/2/0.1

DIST:

3.2/3.5m

LVL :

-2/+2dB

SET

CANCEL

[ ]/[ ]:Up/Down
[ENTER]:Detail

>

01EN_RX-V463_U.book Page 26 Friday, February 1, 2008 11:43 AM