Yamaha FJR13AV(C) - Manual (Page 33)

INSTRUMENT AND CONTROL FUNCTIONS
3-15
3
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Push the rider seat lock lever, lo-
cated under the back of the rider
seat, to the left as shown, and then
pull the seat off.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then push the rear
of the seat down to lock it in place.
2. Install the passenger seat.
NOTE:
● Make sure that the seats are prop-
erly secured before riding.
● The rider seat height can be ad-
justed to change the riding posi-
tion. (See page 3-16.)
1. Projection
2. Seat holder 1. Rider seat lock lever
2. Rider seat
1. Projection
2. Seat holder
U3P610E0.book Page 15 Thursday, December 22, 2005 11:16 AM