Yamaha FJR13AV(C) - Manual (Page 25)

INSTRUMENT AND CONTROL FUNCTIONS
3-7
3
Ambient temperature mode
This display shows the ambient tem-
perature from 16 °F to 122 °F in 1 °F in-
crements. The temperature displayed
may vary from the ambient tempera-
ture.
NOTE:
● If the ambient temperature falls be-
low 16 °F, a lower temperature
than 16 °F will not be displayed.
● If the ambient temperature climbs
above 122 °F, a higher tempera-
ture than 122 °F will not be dis-
played.
● The accuracy of the temperature
reading may be affected when
riding slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.
Instantaneous fuel consumption mode
This display shows the distance that
can be traveled on 1.0 US.gal of fuel
under the current riding conditions.
NOTE:
If traveling at speeds under 10 km/h
(6.0 mi/h), “_ _” will be displayed.
Average fuel consumption mode
This display shows the average fuel
consumption since it was last reset.
When the average fuel consumption
mode is selected, the display flashes
for five seconds, and then “AV _ _
MPG” (average distance that can be
traveled using 1.0 US.gal of fuel) is dis-
played.
NOTE:
● To reset the average fuel con-
sumption display, push the “RE-
SET” button to select the mode
again, and then push the “RESET”
button for 1 second while the dis-
play is flashing.
1. Ambient temperature
1. Instantaneous fuel consumption
1. Average fuel consumption
U3P610E0.book Page 7 Thursday, December 22, 2005 11:16 AM