Zanussi ZKC5020 - Manual (Page 10)

Setting the Desired Cooking Period
This function is used to set the desired cooking period.
To adjust the cooking period, “Mode“ ( )key is
pressed until “dur” indicator lamp starts to flash. The
desired cooking period is adjusted by using “+” and “-”
keys. Once the time is adjusted, it is registered
automatically in 5 seconds following the adjustment.
“A” and “
“ symbols will be illuminated. The screen
returns to the current time. At the emd of a timed cook-
ing period an alarm will sound and “A” and “
“
symbols starts to flash. Pressing any button stops the
alarm and the lamp flashing. It is possible to adjust
cooking period between 0-10 hours.
Setting the Finish Time
This function is used to adjust finish time of the
cooking period. To adjust the finish time of
cooking “Mode” key is pressed until “End” indi-
cator lamp starts to flash. The desired finish
time is adjusted by using “+” and “-” keys. The
time will revert to the time of day when the finish
time is reached an alarm is heard and you can
press any key to stop the alarm. The oven will
turn off.
Setting the Cooking Period and Finish Time
This function is used to adjust the cooking period by
use of the automatic cooking function. Both cooking
period and end time have to be adjusted. The cooking
period is adjusted as explained above. “Mode” key is
pressed until “End” indicator lamp flashes in order to
adjust the ending time. “+” and “-” keys must be used.
Once the time is adjusted, it is registered automatically
in 5 seconds following the adjustment and “A” and
“
“ symbols starts to light continuously. The screen
returns to the current time. An alarm sound is heard at
the end of the time and “A” symbol starts to flash.
Pressing any button stops the alarm and lamp flashing.
10