Xantrex Technology 200 - Manual (Page 7)

Important Safety Instructions
975-0057-01-01 v
WARNING: Heated surface
Ensure at least 2" (5 cm) air space is maintained on
all sides of the
XPower Powerpack 400 and XPower
Powerpack 400 Plus . During operation, keep away
from materials that may be affected by high
temperatures such as blankets, pillows and sleeping
bags.
WARNING: Fire hazard
Never allow jump-start cables’ red and black clamps
to touch each other or another common metal
conductor. This could cause damage to the unit and/
or create a sparking/explosion hazard. Always
disconnect the jump-start cables from the unit after
use and clip the plastic guard over the jump-start
cable port.
WARNING: Fire hazard
Jump-start cable clamps must be connected positive
to positive (red clamp to battery “+”) and negative to
negative (black clamp to battery “-”). A reverse
polarity connection (positive to negative) may cause
damage to the unit and/or create a sparking/explosion
hazard.