Zenith HEALTHVIEW H20J55DT - Manual (Page 45)

Menu Function Value Default Brief Description of Function and Comments
Item Range Value
89-I. POKE ENABLE 0 / 1 0 If set to 1, writing to Non - volatile memory
through *M.P.I. is enabled.
90-I. KEY LOCK 0 / 1 0 If set to 1, front keyboard functionality is disabled.
91-I. NOT USED
92-I. NOT USED
93-I. NOT USED
94-I. NOT USED
95-I. NOT USED
96-I. NOT USED
97-I. NOT USED
98-I. NOT USED
99-I. NOT USED
100-I. NOT USED
101-I. NOT USED
102-I. ATSC BAND 0 - 4 4 Sets digital tuning band.
103-I. ATSC TUNE MD 0 / 1 1 Sets ATSC tuning mode. 0:virtual channel, 1:physical channel
104-I STRT MINOR CH 0 - 255 0 Selects Minor start channel. Set 0 for NTSC.
Not 0, sets Minor channel number.
105-I NOT USED
106-I A RATIO LOCK 0 / 1 0 To retain set aspect ratio on power cycle, set to 1.
Set to 0 for default ratio on power cycle.
107-I NOT USED
108-I NOT USED
109-I NOT USED
110-I NOT USED
111-I NOT USED
112-I NOT USED
113-I NOT USED
114-I NOT USED
115-I NOT USED
116-I NOT USED
117-I RESET2DEFAULT 0 / 1 0 0=Normal. 1=Loads factory default presets
for all above settings.
Detailed Descriptions of Installer Menu Items
Installer Menu
Installer Menu Items 89-I through 117-I
0-I. INSTALLER SEQUENCE
Gives access to Installer Menu depending on the
code selected.
0 = 9876 1 = 4321 2 = 1478 3 = 3698
1-I. POWER MANAGE (Power Management)
Determines hours of no activity before automatic
shutoff. The POWER MANAGE function is for saving
energy. If set to 0, Power Manage is OFF. Settings
range from 0 - 7, with 1 - 7 representing the hours
that the TV will remain on, unless there has been
activity from either the control panel or remote
control.
*M.P.I. Multiple Protocol Input: Zenith protocol for
remote control of TV through RJ11 (M.P.I.) jack on
TV connections panel.
Page 45 206-4065