ZyXEL Communications 2602HW-C - Manual (Page 10)

Prestige 2602HW Series Quick Start Guide
10
2.6 Make Calls Through the Internet
When the VoIP LED turns on, your SIP account is registered successfully. Dial a numerical SIP number (like
“12345” for example) on your phone’s keypad.
Use speed dial entries for peer-to-peer calls or SIP numbers that use letters. Dial the speed dial entry on your
telephone’s keypad.
Use your voice service provider’s dialing plan to call regular telephone numbers.
2.7 Wireless Configuration
WPA-PSK encryption is preferred to WEP because it has user authentication and improved data encryption. If
you don’t have WPA-capable wireless clients, configure WEP encryption.
Note: Wireless clients and the Prestige must use the same SSID, channel ID, WEP or WPA-PSK key (if
enabled).
1 Click the Wireless LAN link under
Advanced Setup.
2 Click
802.1x/
WPA. Select
Authenticati
on
Required,
then select
WPA-PSK
and type a
Pre-shared
Key.
3 Click Advanced Setup, Wireless LAN,
Wireless. In the ESSID field, enter up to 32
printable characters to uniquely identify the
Prestige.
If you didn’t configure WPA-PSK, configure
WEP in this screen (not visible if you’ve
configured WPA-PSK).