ZyXEL Communications Internet Security Gateway 10~100 Series User Manual
Page 65
ZyWALL 10~100 Series Internet Security Gateway
Firewall Commands
10-7
Chart 10-1 Firewall Commands
FUNCTION
COMMAND
DESCRIPTION
config edit firewall set
single
This command sets a rule to have the
ZyWALL check for TCP traffic with this
destination address. You may repeat this
command to enter various, non-consecutive
port numbers.
config edit firewall set
range
This command sets a rule to have the
ZyWALL check for TCP traffic with a
destination port in this range.
config edit firewall set
single
This command sets a rule to have the
ZyWALL check for UDP traffic with this
destination address. You may repeat this
command to enter various, non-consecutive
port numbers.
config edit firewall set
range
This command sets a rule to have the
ZyWALL check for UDP traffic with a
destination port in this range.
D
D
e
e
l
l
e
e
t
t
e
e
config delete firewall e-mail
This command removes all of the settings for
e-mail alert.
config delete firewall attack
This command resets all of the attack
response settings to their defaults.
config delete firewall set
This command removes the specified set from
the firewall configuration.