Removing the front cover, Specifications – Yamaha NS-125F User Manual

Page 4

Removing the front cover

The front cover, which is attached to each speaker
at six points, can be removed if desired. To
remove a cover, using both hands, gently pull the
top of the cover away from the speaker. When the
cover comes away, gently pull the bottom of the
cover away from the speaker. To reattach the
cover, line up the six holes on the cover with the
six pegs on the speaker, and gently push the cover
onto the speaker.

Specifications

Type.................2-way bass-reflex speaker system

magnetic shielding type

Drivers...... 2.2 cm (7/8 ”) balanced dome tweeter

8 cm (3.1 ”) cone woofer x2

Impedance ...................................................... 6

Ω

Frequency response....................... 60 Hz–35 kHz

Nominal Input power ...................................40 W

Maximum input power...............................120 W

Sensitivity................................... 86 dB/2.83 V/m

Crossover frequency....................................6 kHz

Dimensions (with the stand)
(W

✕ H ✕ D)

.....236 (9.3 ”)

✕ 1050 (41.3 ”) ✕ 236 (9.3 ”) mm

Weight ........................................ 7.2 kg (15.9 lbs)

* Specifications are subject to change without

notice due to product improvements.

Note:
When removing the cover, be careful that you don’t
touch the drive units, and don’t exert excessive force
with any tools.

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Indoneisa

WD73220-1

This product mainly uses lead-free solder.
Cet appareil utilise principalement de la soudure sans plomb.
Dieses Produkt verwendet hauptsächlich bleifreies Lot.
Este producto utiliza principalmente soldadura sin plomo.

0101NS-125F_en.fm Page 4 Thursday, September 2, 2004 5:25 PM