Loading cutlery and dishes – Zanussi ZSF2450 User Manual
Page 8
1
2
max
3
4
Caution! Do not fill the rinse aid dispenser
with other products (e.g. dishwasher
cleaning agent, liquid detergent). There is a risk of
damage to the appliance.
Adjusting the dosage of rinse aid
The rinse aid dial is set
at the factory at posi-
tion 1.
To increase or de-
crease the dosage re-
fer to 'What to do if...'
Loading cutlery and dishes
Helpful hints and tips
Caution! Only use the appliance for
household utensils that are applicable for
dishwashers.
Do not use the appliance to clean objects that
can absorb water (sponges, household cloths,
etc.).
• Before you load cutlery and dishes, do these
steps:
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.
• While you load cutlery and dishes, do these
steps:
– Load hollow items (e.g. cups, glasses and
pans) with the opening down.
– Make sure that water does not collect in the
container or in a deep base.
– Make sure that cutlery and dishes do not lie
inside one another.
– Make sure that cutlery and dishes do not
cover other cutlery and dishes.
– Make sure that glasses do not touch other
glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick coatings
can keep water droplets.
• Plastic items do not dry as well as porcelain and
steel items.
• Put light items in the main basket. Make sure
that the items do not move.
Caution! Make sure that the spray arm can
move freely before you start a washing
programme.
8