ZyXEL Communications ZyXEL ZyAIR G-2000 - Manual (Page 13)

ZyAIR G-2000 802.11g Wireless 4-port Router
13
System Name is a unique name to
identify the ZyAIR in the Ethernet
network. Enter a descriptive name.
The Domain Name entry is what is
propagated to the DHCP clients on
the LAN. If you leave this blank, the
domain name obtained by DHCP
from the ISP is used. Click Next to
continue.
2. Use the second wizard screen to set up the wireless LAN.
ESSID is a unique name to identify
the ZyAIR in the wireless LAN. Enter
a descriptive name.
The range of radio frequencies used
by IEEE 802.11b wireless devices is
called a channel.
Select a radio channel from the
Choose Channel ID drop-down list.
WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless network.
Select either 64-bit or 128-bit from the WEP Encryption drop-down list box to activate WEP encryption. Select Disable to
turn off WEP data encryption.
Select ASCII or HEX WEP key input method and then follow the on-screen instructions to set up the WEP keys.
Click Next to continue.