ZyXEL Communications ZyXEL ZyAIR G-405 - Manual (Page 3)

3
LABEL DESCRIPTION
RESET You only need to use this button if you’ve forgotten the
ZyAIR’s password or the IP address is not known. It
returns the ZyAIR to the factory defaults. Refer to the
User’s Guide.
LAN Use an Ethernet cable to connect to a computer (with an
Ethernet card) or Ethernet device. The port is auto-
negotiating (can connect at 10 or 100 Mbps) and auto-
crossover (automatically adjusts to the type of Ethernet
cable you use (straight-through or crossover)).
DC-IN Connect one end of the included power adaptor to this
power socket.
Use only the included power
adaptor.
3. Check the LED Display
After you make the hardware connections, check the LEDs on the ZyAIR.
LED COLOR STATUS DESCRIPTION
PWR Green On The ZyAIR is receiving power.
Blinking The ZyAIR is rebooting or not ready.
Orange On Power to the ZyAIR is too low or there is a hardware failure.
Off The ZyAIR is not receiving power.