Yamaha VMX EAU10041 - Manual (Page 35)

PRE-OPERATION CHECKS
4-3
4
Clutch
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check fluid level in reservoir.
• If necessary, add recommended fluid to specified level.
• Check hydraulic system for leakage.
6-23, 6-25
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
6-19, 6-27
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-26
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-20, 6-22
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-27
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-28
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
6-28
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches • Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is defective, have Yamaha dealer check vehicle.
3-13
Battery
• Check fluid level.
• Fill with distilled water if necessary.
6-30
ITEM CHECKS PAGE
U5GK15E0.book Page 3 Tuesday, April 13, 2004 3:52 PM