Zenoah BCZ2401S - Manual (Page 42)

42
11. Optional blade usage
English
OPT1
OPT2
OPT4
OPT3
• For security reason, in case of mounting the
blade on this product and use it, purchase the
blade kit (T3195-94000) and change guard,
handle from the original ones, attach hanger and
use shoulder strap.
■ SET UP THE HANGER (OPT1, 2)
1. Loosen the screws and remove the guard.
2. Loosen the screws and remove the gearcase.
3. Loosen the screws and take the loop handle off.
4. Install the hanger complete from the blade side end
and fix it with the screw.
5. Install J-handle and a debris guard for metal blade.
6. Reinstall the gearcase.
(1) Hanger complete : 6420-17300
(2) Shoulder strap :
T3300-17100
Change to the debris guard which is suitable for the
metal blade. (OPT3)
TIGHTENING TORQUE :
130~174 in-lbs
(14.7~19.6 N.m.)
(1) Guard-A : 5764-24000
(2) Guard :
5766-24110
(3) Bracket : 3250-24120
(4) Bolt :
0225-10620
(5) Screw : 0263-30614
(6) Nut : 0280-10605
Change the loop handle to the J-handle for safe
operation. (OPT4)
(1) Bracket : 3583-14101
(2) J-handle : 6367-14200
IMPORTANT
IMPORTANT
WARNING