beautypg.com

Troubleshooting, English 3 – ZyXEL Communications POWERLINE PL-100 User Manual

Page 4

background image

ENGLISH

3

Connecting the PL-100 to a Computer

1 Connect an Ethernet cable to the port on the PL-100.
2 Connect the other end of this Ethernet cable to the Ethernet port of your

computer.

3 Plug the PL-100 into a wall socket that is near your computer.
4 Confirm that the PWR, LINK and ETHN LEDs on the PL-100 are on.

Troubleshooting

The PWR LED is off when the PL-100 is plugged into an outlet.

• Make sure the outlet is working by plugging another electric device into it. If it

is working, plug in the PL-100 again. If the PL-100 LED still does not light,
contact our technical support.

The LINK LED is off and the PL-100 is not detecting another Homeplug device.