Zanussi ZSF 6171 - Manual (Page 27)

27
Cleaning the spray arm jets
Regularly check the jets in the spray arms for
blockages. When cleaning is necessary, re-
move spray arm from the fixture and clean jets
with a pointed object (wire or needle). Then
rinse out the spray arm using a strong jet of
water.
3
Do not damage the jet opening.
Upper basket spray arm
1. To remove upper basket spray arm, tilt it down
hard.
2. Clean spray arms jets.
3. Place cleaned upper basket spray arm back in po-
sition against the connecting piece: press the two
together firmly, until you feel them snap into place.