Zenoah BK2650DL-Hb - Manual (Page 56)

Head Office:
1-9, Minamidai, Kawagoe-city, Saitama, 350-1192 Japan
Telephone: (+81)492-43-1117 Telecopier: (+81)492-43-7197
Working for a better tomorrow
PRINTED IN JAPAN
Warning on Use,
Installation, and Operation!
(Safety Precautions)
● The blade of Komatsu-Zenoah’s brushcutter is a safe
product manufactured with its own specifications.
Before using it, read the following matters well, and
follow them to prevent accidents.
● Before using this product, make sure there is no
broken or cracked part of the blade.
● Never use a blade that is broken, deformed, or worn
down. Use Zenoah’s genuine blades.
● Two-tooth blades are very dangerous, and could
cause a serious injury. Try to avoid using them.
● If the blade hits stone, concrete, metal, or any other
object, it could cause serious injury to the user of this
product or people nearby. Be careful to avoid such
objects. If the product does hit an object, stop work
immediately and check the blade thoroughly.
● When storing the machine, put the cover on the
blade. When using the machine, always keep the
safety guard installed.
● Install the blade correctly, and make sure the
connecting pin in the blade does not come out of
place.
● Cut branches of soft trees; do not cut hard trees.
● If abnormal or unusual vibration occurs, stop work
immediately and check the blade.
● Do not use this blade for any other manufacturer’s
grass-cutter.
● While using this machine, prevent any person or
animal from accessing the area within 15 m of the
machine.
● Be sure to wear protective gear when using the
machine.
● When replacing the blade,
1) Make the lower part of the blade edges round.
Otherwise, the blade edges could chip off.
2) An unbalance blade increases the vibration of the
machine. Make sure the blade is not unbalanced.
3) Note that the blade becomes hot. When the blade
becomes hot, cool it in air gradually. Cooling it
with water might cause invisible cracks.
● For details of the kind, specifications, material name,
and other instructions for the blade, refer to the face
of the blade.
● Manufactured in Japan.
● Japanese supplier: Komatsu Zenoah Co. Japan