Zenoah G6200 User Manual
Page 3
G6200
G
B
GB-3
Contents
1.
For Safe Operation ................................................................... 4
2.
Explanation of Symbols on the Machine .................................. 6
3.
Installing Guide Bar and Saw Chain ......................................... 7
4.
Fuel and Chain Oil .................................................................... 8
5.
Operating the Engine ............................................................... 9
6.
Sawing .................................................................................... 11
7.
Maintenance ........................................................................... 12
8.
Maintenance of Saw Chain and Guide Bar ............................ 14
9.
Troubleshooting Guide ........................................................... 15
10.
Disposal .................................................................................. 15
11.
Specifications ......................................................................... 15
Masahiko GOUDA
General Manager, Quality Assurance Department
Signed in Saitama, Japan
DECLARATION OF CONFORMITY TO MACHINES DIRECTIVE
(Directive 98/37/EC, 89/336/EEC)
and to the regulations governing transposition
Internal control production
MANUFACTURER : Husqvarna Zenoah Co., Ltd.
No. 9, 1-Chome
MINAMIDAI, KAWAGOE City
SAITAMA, JAPAN
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW :
Model
: G6200
Serial no.
: 800001 and up
Make
: Husqvarna Zenoah
1st March 2008
CONFORMS TO THE REQUIRMENTS OF THE MODIFIED MACHINES
DIRECTIVE (Directive 98/37/EC) AND TO THE NATIONAL REGULATIONS
GOVERNING ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A “CE” CERTIFICATE, NO. U3 2892006 01
BY TÜV Rheinland Group - TÜV Rheinland InterCert kft. Product Certification -
H-1061 Budapest Paulay Ede u. 52 - HUNGARY