Yamaha RX-V861 User Manual

Page 100

Advanced setup

■ SCENE IR code setting

SCENE IR

Use this feature to output the remote control signals at the
REMOTE OUT jack automatically when this unit is in the
SCENE mode.
Choices: ON, OFF
• Select “ON” when the component connected to the

REMOTE OUT jack is the Yamaha component and has
the capability of the SCENE control signals. This unit
automatically sends the remote control signals to the
component.

• Select “OFF” when the component connected to the

REMOTE OUT jack is not the Yamaha component and
does not have the capability of the SCENE control
signals.

If noises are output when you operate the SCENE function, set
“SCENE IR” to “OFF”.

■ Bi-amplifier setting

BI-AMP

Use this feature to activate or deactivate the bi-amplifier
function (see page 14).
Choices: ON, OFF
• Select “ON” if you want to activate the bi-amplifier

function. “SUR.B L/R SP” is set to “NONE”
automatically, and this unit outputs the front channel
audio signals at the SURROUND BACK/BI-AMP
speaker terminals.

• Select “OFF” if you want to deactivate the bi-amplifier

function.

When “BI-AMP” is set to “ON”, you can only select “FRONT B”
or “NONE” in “EXTRA SP ASSIGN” (see page 72).

■ Video parameter reset

V.RESET

Use this feature to initialize the “VIDEO CONV.”,
“HDMI UP-SCALING”, “HDMI ASP” and “OSD
SHIFT” settings in “DISPLAY SET” (see page 81).
Choices: YES, CANCEL

■ Monitor check

MON.CHK

Use this feature to activate or deactivate the monitor check
function of this unit. When this parameter is set to “YES”,
this unit receives the information of the available video
signal resolutions from the video monitor connected via
HDMI (see page 81).
Choices: YES, SKIP

■ Tuner frequency step

(Asia and General models only)

Use this feature to set the tuner frequency step according
to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• Select “AM10/FM100” for North, Central and South

America.

• Select “AM9/FM50” for all other areas.

See page 93 for the operation of the advanced setup.

Note