beautypg.com

Operation, The ceramic hob, Using the hob – Zanussi ZKT6050 User Manual

Page 12: Automatic warm up, Using the stop + go function, Using the hob timer, Warning

background image





12

Operation

The ceramic hob

WARNING!

Do not use the appliance if the ceramic glass
is damaged. If a fault or crack becomes
visible, disconnect the appliance
immediately from the electricity supply and
contact your local service force centre.

Using the hob

The hob must be switched on before
setting any cooking function or programme.

For single hotplates press the increase

or decrease

control to vary the heat

setting. The highest number represents
the hottest setting and the lowest number
represents the coolest setting. Choose a
setting appropriate to the quantity and type
of food to be cooked.

To turn off a hob element press increase
and decrease controls together.

Automatic warm up

All cooking zones are equipped with an
automatic warm up function. The cooking zone
switches to full power for a certain amount of
time and then automatically switches back to
the heat setting set.

Press the increase

control and scroll

through the heat settings to 9 then press the
increase

control again 'A' will show in the

display. An audible signal will sound. Now
press the decrease

control to the setting you

require. The hob will show 'A' in the display
until the Automatic warm up programme has
finished then returns to the setting set.

Using the stop + go function

The stop + go function switches all cooking
zones that are switched on to the keep warm
setting and then back to the heat setting that
was previously set.

This function can be used to briefly interrupt

and then continue the cooking process.

To switch on press the stop and go control.

The hob display will show the keep warm
symbol

.

To switch off press the stop and go control.

The display will revert to the heat setting that
was previously set.

Using the hob timer

All cooking zones can use each one of the two
timer functions at the same time.

If a cooking zone is switched off, the timer

function set is also switched off.

Function

Condition

Outcome

Automatic cut-

out

A heat

setting is set

Acoustic

signal

00 flashes

Cooking

zone

switches off

Countdown

timer

Cooking

zones not in

use

Acoustic

signal 00

flashes