Rx-v393rds, Rx-v493rds, Disappears – Yamaha RX-V393RDS User Manual
Page 24
9
Adjust the sound output levels of the center speaker and
the rear speakers so that they become almost as same
as that of the main speakers.
Make the adjustment of each speaker output level at your
listening position with the remote control transmitter.
a)
Press once or more so that “CENTER” or “REAR”
appears on the display.
* Select “CENTER” to adjust the output level of the
center speaker, and select “REAR” to adjust the
output level of the rear speakers.
b)
Adjust its level.
* Pressing the + side raises and the – side lowers the
level.
10
Cancel the test tone.
Notes
●
Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using
the VOLUME control (or the VOLUME keys on the remote
control transmitter) only.
●
If you use external power amplifiers, you may also use
their volume controls to achieve proper balance.
●
If there is insufficient sound output from the center and
rear speakers, you may decrease the main speaker
output level by setting the MAIN LEVEL switch on the
rear panel to “–10 dB”.
●
RX-V493RDS only
In step 9, if the center channel mode is in the
“PHANTOM” position, the sound output level of the center
speaker cannot be adjusted. This is because in this
mode, the center sound is automatically output from the
left and right main speakers.
24
2CH
/6CH
REC/PAUSE
DIR B
DIR A
PLAY
DISC
VOLUME
PLAY
PRESET
A/B/C/D/E
–
+
TEST
DELAY TIME
EFFECT
PROGRAM
PROLOGIC
ENHANCED
–
+
SLEEP
TAPE
A/B
ON/OFF
TUNER
CD
PHONO
VIDEO
VCR
POWER /I
RX-V393RDS
RX-V493RDS
REC/PAUSE
DIR B
DIR A
PLAY
DISC
POWER /I
VOLUME
PLAY
PRESET
A/B/C/D/E
–
+
TIME/
LEVEL
TEST
EFFECT
PROGRAM
PROLOGIC ENHANCED
–
+
SLEEP
TAPE
A/B
ON/OFF
2CH
/6CH
TUNER
CD
PHONO
DELAY/CENTER
/REAR/SWFR
DVD/LD
VCR
TV/DBS
10
10
9
RX-V393RDS
TIME/
LEVEL
–
+
RX-V493RDS
DELAY/CENTER
/REAR/SWFR
Disappears.
TEST
CENTER
LEVEL
0
l0
REAR
LEVEL
0
l0
l6
20
28
40
60
l2
8
4
2
0
–dB
9