Yamaha REV500 - Manual (Page 16)

12
Parameter Ctrl. No. Range Description
SPEED 74 0.05 — 10.00 [Hz] Modulation frequency
DEPTH 75 0 — 100 [%] Modulation depth
FB LVL 76 0 — 100 [%] Feedback level (REVERB
➔ FLANGER effects only)
MIX 77 0 — 100 [%] Cutoff frequency of low pass filter
REVERB
➔ CHORUS, FLANGER or SYMPHONIC
In these effect types, the output from the reverb is fed into a chorus, flanger, or symphonic effect.
Parameter Ctrl. No. Range Description
SPEED 74 0.05 — 10.00 [Hz] Modulation frequency
DEPTH 75 0 — 100 [%] Modulation depth
MIX 77 0 — 100 [%] Cutoff frequency of low pass filter
REVERB + CHORUS
This effect type, the source sound is processed separately by both the reverb and a chorus effect. The results
of this parallel processing are then mixed for output.
Note that in this effect type, the LPF and HPF (see COMMON parameters, above) are applied immediately
before the PRE DELAY. Hence, these filters do not affect the sound processed by the chorus effect.