Yamaha CDX-393MKII - Manual (Page 17)

17
English
L Automatic Random Program tape recording
1
Follow steps 1 – 4 on page 15.
2
3
Begin recording on the tape deck and at the same time,
press the PLAY button on this unit.
RANDOM
The unit will automatically program tracks for side A and
side B separately considering the tape’s total time.
4
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit.
Notes
• Because the programmed data changes every time the
RANDOM button is pressed, the amount of time remaining at
the end of the tape also changes accordingly.
• If the tape’s length is not enough, not all tracks can be
programmed. In this case, exchange the tape for a longer
one.
• In step 2, you can check the program data for side A and
side B.
PROGRAM
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
TOTAL
1 The total number of programmed tracks of each side
appears momentarily when the automatic programming is
finished. Then the first programmed track number for side
A reappears.
2 Shows the total time of programmed tracks for each side.
3 Shows the side of the tape.
4 Shows the programmed track numbers for each side.
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
• You can use “CD SYNCHRONIZED RECORDING” if your
tape deck has this function. In step 3 and 4, press the
SYNCHRO button then press the PLAY button on this unit’s
remote control transmitter. Recording automatically begins
(for details, refer to page 19.)
2
3, 4
4
2 1
SPACE TAPE PEAK
SYNCHRO
3 INDEX
PROG CLEAR
OPEN/
CLOSE
8 7 9 0
5 4 6 + I0
DIMMER TIME
REPEAT RANDOM
SEARCH
SKIP OUTPUT LEVEL – +
STOP PAUSE PLAY
The unit can automatically program tracks in random order for recording to tape.