Yamaha CDX-393MKII - Manual (Page 15)

15
English
TRACK PROGRAMMING FOR RECORDING TO TAPE
The unit can automatically program tracks considering the tape’s total time. This convenient feature can help you to program tracks
so that they fit onto the tape with the least amount of unrecorded space remaining at the end of each side (A and B) of the tape.
L Automatic tape-programming
The unit can automatically program tracks on a disc in their
original order.
1
Stop the unit.
STOP
* The peak level searching function of this unit is useful for
adjusting the recording level on the tape deck. (Refer to
page 18.)
2
You can automatically insert additional time space
between tracks. (Refer to page 10.)
SPACE
SPACE
3
Enter the tape’s total possible recording time.
You can select any of four tape lengths by pressing the
TAPE button.
TAPE
(Off)
TAPE
5
Press the REPEAT button.
The unit automatically programs tracks for side A and side B
separately considering the tape’s total time.
REPEAT
6
Begin recording on the tape deck and press the
PLAY button on this unit at the same time.
7
The unit will pause at the end of side A of the tape.
Turn the tape over to side B, resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit.
Notes
• All the tracks may not be programmed if the tape’s length is
not enough. To program all tracks, use a longer tape.
• In step 5, you can check the program data for side A and
side B.
PROGRAM
A
1 2 3 4 5
TOTAL
1 The total number of programmed tracks of each side
appears momentarily when the automatic programming is
finished. Then the first programmed track number for side
A reappears.
2 Shows the total time of programmed tracks for each side.
3 Shows the side of the tape.
4 Shows the programmed track numbers for each side.
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
• You can use “CD SYNCHRONIZED RECORDING” if you
have a YAMAHA tape deck with this function. In step 6 and 7,
press the SYNCHRO button then press the PLAY button on
this unit’s remote control transmitter. Recording automatically
begins (for details, refer to page 19.)
2 1
SPACE TAPE PEAK
SYNCHRO
3 INDEX
PROG CLEAR
OPEN/
CLOSE
8 7 9 0
5 4 6 + I0
DIMMER TIME
REPEAT RANDOM
SEARCH
SKIP OUTPUT LEVEL – +
STOP PAUSE PLAY
3
2
5
1 6, 7
7
4
4
Otherwise, you can enter the tape’s total possible
recording time manually.
Example: For a C-64 tape (32 minutes on each side)
6 4
+