Yamaha PJP-25UR - Manual (Page 15)

English 13
1 Arrayed microphones
Picks up the talker’s voice.
2 Speaker
Outputs the sounds.
3 MENU/PC
Press to activate the PJP-25UR Controller. For details,
refer to the “User’s Manual” included in the supplied CD-
ROM.
4 SHORTCUT
Press to activate the function specified in the PJP-25UR
Controller. For details, refer to the “User’s Manual”
included in the supplied CD-ROM.
5 VOLUME +/–
Press to adjust the speaker volume. Holding either key
increases or decreases the volume continuously.
6 MIC MUTE
Press to temporarily turn off (mute) the microphones. To
cancel the mute function, press it again.
7 USB port
Connect to the computer using the USB cable.
8 DC IN 5V terminal
Connect the AC adapter (sold separately).
9 AUDIO OUT terminal
Connect to the line-in on the audio device or computer.
0 AUDIO IN terminal
Connect to the line-out on the audio device or computer.
y
Pressing MENU/PC and VOLUME + at the same time switches the environment setting to “Conference Room”.
Pressing MENU/PC and VOLUME – at the same time switches it to “Normal”.
Holding down MENU/PC and SHORTCUT at the same time resets this unit’s settings.
Controls and Functions
7 8 9 0
1 2
3 4 5 1 6