Yamaha RX-V390RDS - Manual (Page 27)

27
English
To play a source with the digital sound field processor
DECK A/B VCR MON REC/PAUSE STOP
3 STEREO
— +
+
—
CENTER
MODE PRO LOGIC
HALL ROCK
DELAY
TIME
EFFECT
ON/OFF VOLUME
SUR.
2
3
1
Follow steps 1 – 6 shown in “BASIC OPERATIONS” on
page 14.
2
Turn the DSP on, so that a program name appears on
the display.
3
Select the desired program that is suitable for the
source.
The selected program name is shown on the display.
4
If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on the next page.)
Notes
● If you prefer to cancel the DSP, press the EFFECT switch.
The sound will be the normal 2-channel stereo without
surround sound effect.
● When ROCK or HALL is selected, no sound is heard from
the center speaker.
● When a monaural sound source is played with DOLBY PRO
LOGIC or DOLBY 3 STEREO, no sound is heard from the
front speakers and the rear speakers. Sound is heard only
from the center speaker. For DOLBY PRO LOGIC only,
however, if the center channel mode is in PHANTOM, the
front speakers output the sound of the center channel.
● When this unit’s Dolby Pro Logic Surround system is used, if
the main-source sound is considerably altered by
overadjustment of the BASS or TREBLE controls, the
relationship between the center and rear channels may
produce an unnatural effect.
EFFECT
HALL
PROGRAM
TEST
PRO LOGIC
2 3