Yamaha HTR-5140RDS - Manual (Page 9)

9
English
1
Multi-information display
This displays various information, for example the station
frequency, preset station number and name of the selected
program source.
2
MEMORY indicator
When MEMORY is pressed, this indicator flashes for about five
seconds. During this period, the displayed station can be
stored in the memory.
3
AUTO TUNING indicator
This lights up when the unit is in the automatic tuning mode.
4
TAPE/MD MON indicator
This lights up when the tape deck (or MD recorder, etc.) is
selected as the program source by pressing TAPE/MD MON /
EXT. DECODER on the front panel or TAPE/MD on the remote
control transmitter.
5
STEREO indicator
This lights up when an FM stereo broadcast with sufficient
signal strength is being received.
6
Signal-level meter
This indicates the signal level of the station being received.
If multipath interference is detected, the indication decreases.
7
RDS mode indicators
The name(s) of RDS mode(s) employed by the currently
received RDS station light(s) up. Illumination of one of the
named indicators shows that the corresponding RDS mode is
now selected.
DISPLAY PANEL
8
, and indicators
“ ” lights up when the built-in Dolby Digital decoder is
on and the signal of the selected source encoded in Dolby
Digital sound is not in 2-channel. “
” lights up when the
built-in digital sound field processor is on, and “ ”
lights up when the built-in Dolby Pro Logic Surround decoder is
on. Depending on the selected DSP program, both “
”
and “ ”, or both “ ” and “ ” will light up.
9
PTY HOLD indicator
This lights up while a search is being performed in the PTY
SEEK mode.
0
EON indicator
This lights up when an RDS station that employs the EON data
service is being received.
q
Program type name indicators
The name selected in the EON mode lights up.
w
SLEEP indicator
This lights up while the built-in SLEEP timer is functioning.
01RX-V495RDS-1 6/22/99, 12:26 PM 9