Gorenje MO-20 DGE - Manual (Page 41)

41
To Cook with Convection
To cook with convection, press CONVECTION
button repeatedly to enter the desired convection
temperature.(110℃~200
℃)
Suppose you want to cook at 180
℃ for 40
minutes.
1.
Press CONVECTION button repeatedly to
select cooking temperature as shown on
screen.
2. Use the MENU/TIME dial to enter cooking
time.
3. Press START/QUICK START button to
start.
NOTE: You can check the convection
temperature while cooking is in progress by
pressing the CONVECTION button.
To Preheat and Cook with Convection
Your oven can be programmed to combine
preheating and convection cooking operations.
Suppose you want to preheat to 170
℃and then
cook 30 minutes.
1.
Press CONVECTION button repeatedly, to
select cooking temperature as shown on
screen.
2. Press START/QUICK START button to
start. Beeps will sound when the designated
temperature is reached.
3. Open the door and place container of food
at the center of the turntable.
4. Use the MENU/TIME dial to enter cooking
time.
5. Press START/QUICK START button to
start.
8. MICROWAVE +CONVECTION
This oven has four pre-programmed settings that
make it easy to cook with both convection heat
and microwave automatically .the longest time
you can set here is 9 hours and 30 minutes.
Press MICRO.+CONVECTION button repeatedly
to program convection temperature:
temperature(℃)
COMB1 110
COMB2 140
COMB3 170
COMB4 200
Suppose you want to bake a cake for 24 minutes
on COMB3.
1.
Press MICRO+CONVECTION button
repeatedly until display the desired
temperature.
2. Use the MENU/TIME dial to enter cooking
time as desired.
3. Press START/QUICK START button to
start.
4. NOTE:
You can check the convection temperature while
cooking is in progress by pressing the
MICRO.+CONVECTION button.
9. MULTI-STAGE COOKING
Your oven can be programmed for up to 3
automatic cooking sequences.
Suppose you want to set the following cooking
program.
Microwave cooking
↓
Convection cooking
1.
Press POWER LEVEL button to set power
level.
2. Rotate the MENU/TIME dial to program
cooking time.
3. Press CONVECTION button to set
convection temperature.
4. Rotate the MENU/TIME dial to program
cooking time.
5. Press START/QUICK START button to
start.
Note: If need to defrost the food before cooking,
you can only set Jet defrost program in the first
stage of multi-stage cooking program.
Quick start, Auto menu, Preheat program of
convenction can not be set in multi-stage
cooking program.