Yamaha YW50T - Manual (Page 25)

3-6
INSTRUMENT AND CONTROL FUNCTIONS
1. Fuel tank cap
2. Oil tank cap
3. Fuel tank cap lock lever
1
EAU03753
Fuel
Make sure that there is sufficient fuel
in the tank. Fill the fuel tank to the
bottom of the filler tube as shown.
EW000130
w
Do not overfill the fuel tank, other-
wise it may overflow when the fuel
warms up and expands.
Avoid spilling fuel on the hot engine.
1. Fuel tank filler tube
2. Fuel level
1
2
3
2
3
Fuel and 2-stroke engine oil
tank caps
The fuel tank cap and the 2-stroke
engine oil tank cap are located un-
der the seat. (See page 3-8 for seat
opening and closing procedures.)
Fuel tank cap
To remove the fuel tank cap
Lift the fuel tank cap lock lever and
then turn it from the “LOCK” posi-
tion to the “OPEN” position. The fuel
tank cap can then be removed.
To install the fuel tank cap
Insert the fuel tank cap into the tank
opening with the mark on the cap
and fuel filler aligned. Turn the le-
ver to the “LOCK” position, and then
push it down.
EW000023
w
Make sure that the fuel tank cap is
properly closed and locked before
riding.
2-stroke engine oil tank cap
Remove the 2-stroke engine oil tank
cap by turning it counterclockwise.
Install the 2-stroke engine oil tank
cap by turning it clockwise.
EW000025
w
Make sure that the fuel and 2-stroke
engine oil tank caps are properly
installed before riding the scooter.
5PJ-F8199-13.pm65 5/25/2004, 5:31 PM 24