Yamaha YW50T - Manual (Page 23)

ENGINE STOP
START
3-4
INSTRUMENT AND CONTROL FUNCTIONS
EAU00118
Handlebar switches
EAU03888
Dimmer switch “ &/%”
Set this switch to “ &” for the high
beam and to “ %” for the low beam.
EAU03889
Turn signal switch “ 4/6”
To signal a right-hand turn, push this
switch to “
6”. To signal a left-hand
turn, push this switch to “ 4”. When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in af-
ter it has returned to the center po-
sition.
3
1
1. Dimmer switch “ &/%”
2. Turn signal switch “ 4/6”
3. Horn switch “ *”
4. Engine stop switch “ $/#”
5. Start switch “ ,”
2 3
4
5
EAU00129
Horn switch “ *”
Press this switch to sound the horn.
EAU00113
Fuel gauge
The fuel gauge indicates the amount
of fuel in the fuel tank. The needle
moves towards “E” (Empty) as the
fuel level decreases. When the
needle reaches “E”, refuel as soon
as possible.
NOTE:
Do not allow the fuel tank to empty
itself completely.
1. Fuel gauge
EAU03890
Engine stop switch “ $/#”
Set this switch to “ #” before start-
ing the engine. Set this switch to
“
$” to stop the engine in case of an
emergency, such as when the
scooter overturns or when the
throttle cable is stuck.
EAU00143
Start switch “ ,”
Push this switch to crank the engine
with the starter.
EC000005
c C
See page 5-1 for starting instruc-
tions prior to starting the engine.
0
10
20
30
40
0000001 MPH
•10
•20 30 40
50
60• km/h
•0
• •
•
1
5PJ-F8199-13.pm65 5/25/2004, 5:31 PM 22