Zanussi ZWO 3101 - Manual (Page 18)

2
1
9. Remove the four bolts with a key. Pull out the
plastic spacers. Remove the power supply cable
and the drain hose from the hose holders.
10. Put the plastic caps in the holes. You can find
these caps in the user manual bag.
Warning! Remove all the packaging and the transit
bolts before you install the appliance.
We recommend that you keep the packaging and the
transit bolts for when you move the appliance.
Positioning and levelling
• Install the appliance on a flat hard floor.
• Make sure that carpets do not stop the air circulation
below the appliance.
• Make sure that the appliance does not touch the wall
or other units
x4
x4
• Loosen or tighten the feet to adjust the level. A cor-
rect adjustment of the appliance level prevents the
vibration, noise and the movement of the appliance
when in operation.
• The appliance must be level and stable.
Caution! Do not put cardboard, wood or equivalent
materials below the appliance feet to adjust the
level.
18