ZyXEL Communications 802.11g Wireless Ethernet Adapter 1-G-470 - Manual (Page 3)

3
Hardware Connections
Figure 1 The G-470: Rear Panel
The following table describes the rear panel of the G-470.
Follow the steps below to install the G-470 in your computer.
1 Screw the antenna clockwise onto the antenna connector.
Make sure the antenna is securely screwed onto the
antenna connector.
2 Use an Ethernet network cable to connect your computer
to the ETHERNET port for Internet access.
3 Use the power adaptor provided with your G-470 to
connect an appropriate power source to the POWER
socket. Make sure the power source is on. Use only the
included power adaptor.
Label Description
1 Antenna connector
2 RESET button
3 ETHERNET port
4 POWER socket