Yamaha RX-V757 - Manual (Page 67)

65
SET MENU
A
D
V
ANCED
OPERA
TION
English
■ Parameter initialization C)PARAM. INI
Use this feature to initialize the parameters for each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
settings.
Press the corresponding numeric button for the sound
field
program that you want to initialize.
Choices:
An asterisk (*) appears next to program numbers that have
been changed from their initial settings.
Choices: STEREO, MUSIC, ENTERTAINMENT,
MOVIE, STANDARD
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any program groups when “MEMORY
GUARD” is set to ON.
■ Zone set D) MULTI ZONE SET
Use to specify the location of speakers connected to the
SPEAKERS B terminals.
Speaker B setting SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices:
FRONT , ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
• If you connect headphones to the PHONES jack on the unit
when “SP B” is set to ZONE B, the sound is output from both
headphones and SPEAKERS B.
• If a DSP program is selected when “SP B” is set to ZONE B,
the unit automatically enters the Virtual CINEMA DSP mode.
Zone 2 amplifier ZONE2 AMP
(RX-V757 only)
Use to select how the ZONE 2 speakers will be amplified.
Choices: INT,
EXT
• Select EXT if you do not use Zone 2 speakers or if you
connect your Zone 2 speakers through an external amplifiers
connected to this unit’s ZONE 2 OUTPUT jacks.
• Select INT to use this unit’s internal amplifier if you
connect your Zone 2 speakers directly to this unit’s
PRESENCE/ZONE 2 speaker terminals.
Notes
STEREO
*MUSIC
ENTERTAINMENT
MOVIE THEATER
*STANDARD
Press DSP Key
C)PARAM. INI
. SP B;;;;;;;;FRONT
ZONE2 AMP ;;;;;EXT
[<]/[>]:Select
[ENTER]:Return
D)MULTI ZONE SET
Notes
. SP B;;;;;;;;FRONT
ZONE2 AMP ;;;;;EXT
[<]/[>]:Select
[ENTER]:Return
D)MULTI ZONE SET