Yamaha DSP-AX620 EN - Manual (Page 43)

41
English
INTR
ODUCTION
PREP
ARA
TION
B
ASIC
OPERAIONT
AD
V
ANCED
OPERA
TION
ADDITIONAL
INFORMA
TION
APPENDIX
REMOTE CONTROL FEATURES
2
1
3
5
4
@
#
!
A/B/C/D/E
A/B/C/D/E
2
5
4
1
3
6
Commonly Used Buttons in Any
Position of the Selector Dial
Regardless of the position of the selector dial, you can
control this unit and your TV with the following buttons.
Note
• You have to set up the code for your TV in the TV position
before you can control the TV.
■ Controlling this unit
See “Remote Control”.
1
STANDBY
2 POWER
3 VOLUME +/–
4
SLEEP
Note
• If you have set up the code for your TV and set the selector dial
to the TV position, this button is used to set the sleep timer for
the TV.
5
MUTE
Note
• If you have set up the code for your TV and set the selector dial
to the TV position, this button is used to mute the TV sound.
■ Controlling your TV
! TV POWER
@ TV INPUT
#
TV VOLUME +/–
Controlling the Components
Connected to This Unit
The example below describes the procedure for
controlling a YAMAHA CD player.
1 Set the selector dial to the
CD position.
2 Turn on the power.
3 Press INPUT.
The indicator lights up for
about 3 seconds.
4 Press CD while the
indicator is lit.
5 Press p.
See “Button Names and
Functions in Eash Position”
for the CD player operation
buttons.
6 Adjust the volume.
If you set the remote control with the manufacturer
codes listed from page i at the end of this
manual, you can control other brands of components.
See “Setting the Manufacturer Codes” for details.
0108AX620(GB)_40-46_EN 1/23/1, 9:28 AM 41